Gallery of previous refurbishment projects:
Our current stock list of refurbished ovens and furnaces:
In addition to our range of new ovens and furnaces, we also offer a range of reconditioned ovens for sale and refurbished furnaces for sale or possible hire.
Since the used equipment list is constantly changing, the type of units available varies considerably.
Therefore we recommended that you use the email link or telephone us to tell us your requirements and / or receive an up to date stock list. The illustrations in the gallery images above show the type and diversity of equipment previously supplied.
Our current stock list of refurbished units is as noted below:
Carbolite BWF 12/23 Ashing Furnace. 1200°C 23 Litre
Price EX Works: £2,950 + VAT
7.5kW Ashing Furnace Three Phase to 1200°C.- 23 Litre chamber
- Safe, simple and economical to use
- 415v three phase bench top ashing furnace
- Efficient low thermal mass insulation
- Carbolite 201 Digital Temperature Controller
- High quality heating elements
- Solid state relays
- Safety door switch
Product Description:
This product listing is for a Carbolite 7.5 kW three phase ashing furnace. The burn off furnace features a vertically lifting full width door which affords obstruction free access to the work chamber and keeps the hot face away from the operator at all times. The internal capacity of the furnace is 23 Litres with a 1200°C temperature rating and quality wire wound elements for optimum uniformity. The furnace features the Carbolite Type 201 digital temperature controller for accurate set point adjustment and a door safety switch. (The furnace can be reconfigured as a chamber furnace if required, please contact us for details). As this is a refurbished furnace, there are minor scratches and imperfections as shown in the images. The full retail price for a new equivalent unit is over £7,000. A refurbished furnace is not only good for the environment but also represents a significant saving on Capital Investment.
Heating: The furnace chamber features two banks of free radiating wire wound elements for optimum uniformity. Elements are held in position in hard-wearing alumina element carriers. The chamber also includes a tiled hearth.
Controls: The furnace is equipped with the Carbolite Type 201 Digital Controller to allow accurate set-point adjustment. Controls also include a mains switch, thermocouple break protection and heating indicator lamps. The furnace features a door safety switch which cuts power to the elements when the door is opened.
| Model No. | Max °C | Internal Dimensions mm H x W x D | Volume Litres | External Dimensions mm H x W x D | 415 Volts AC Power |
|---|---|---|---|---|---|
| BWF 12/23 | 1200 | 235 x 245 x 400 | 23L | 700 x 500 x 680 | 7.5 kW |
Carbolite CWF 12/23 Furnace. 1200°C 23 Litre
Price EX Works: £2,650 + VAT
9kW Single Phase to 1200°C.- 23 Litre chamber
- Simple and economical to use
- 240v single phase bench top furnace
- Carbolite 201 Digital Temperature Controller
- High quality heating elements
- Can be configured for 3 phase if required
- Ashing Furnace available if required
- Safety door switch
Product Description:
This product listing is for a Carbolite 9 kW single phase benchtop furnace. The chamber furnace features a vertically lifting full width door which affords obstruction free access to the work chamber and keeps the hot face away from the operator at all times. The internal capacity of the furnace is 23 Litres with a 1200°C temperature rating and quality wire wound elements for optimum uniformity. The furnace features the Carbolite Type 201 digital temperature controller for accurate set point adjustment and a door safety switch. (The furnace can be reconfigured for three phase supply if required, please contact us for details). As this is a refurbished furnace, there are minor scratches and imperfections as shown in the images. The full retail price for a new equivalent unit is over £7,000. A refurbished furnace is not only good for the environment but also represents a significant saving on Capital Investment.
Heating: The furnace chamber features two banks of free radiating wire wound elements for optimum uniformity. Elements are held in position in hard-wearing alumina element carriers. The chamber also includes a tiled hearth.
Controls: The furnace is equipped with the Carbolite Type 201 Digital Controller to allow accurate set-point adjustment. Controls also include a mains switch, thermocouple break protection and heating indicator lamps. The furnace features a door safety switch which cuts power to the elements when the door is opened.
| Model No. | Max °C | Internal Dimensions mm H x W x D | Volume Litres | External Dimensions mm H x W x D | 230 Volts AC Power |
|---|---|---|---|---|---|
| CWF12/23 | 1200 | 235 x 245 x 400 | 23L | 700 x 500 x 680 | 9 kW |
Carbolite CWF 12/23 Furnace. 1200°C 23 Litre
Price EX Works: £2,450 + VAT
7kW Three Phase to 1200°C.- 23 Litre chamber
- Simple and economical to use
- 3 phase bench top furnace
- Carbolite 201 Digital Temperature Controller
- High quality heating elements
- Refurbished using genuine Carbolite components
- Ashing Furnace option available if required
- Safety door switch
Product Description:
This product listing is for a Carbolite 7 kW three phase laboratory furnace. The chamber furnace features a vertically lifting full width door which affords obstruction free access to the work chamber and keeps the hot face away from the operator at all times. The internal capacity of the furnace is 23 Litres with a 1200°C temperature rating and quality wire wound elements for optimum uniformity. The furnace features the Carbolite Type 201 digital temperature controller for accurate set point adjustment and a door safety switch. (The furnace can be reconfigured as an ashing furnace if required, please contact us for details). As this is a refurbished furnace, there are minor scratches and imperfections as shown in the images. The full retail price for a new equivalent unit is over £7,000. A refurbished furnace is not only good for the environment but also represents a significant saving on Capital Investment.
Heating: The furnace chamber features two banks of free radiating wire wound elements for optimum uniformity. Elements are held in position in hard-wearing alumina element carriers. The chamber also includes a tiled hearth.
Controls: The furnace is equipped with the Carbolite Type 201 Digital Controller to allow accurate set-point adjustment. Controls also include a mains switch, thermocouple break protection and heating indicator lamps. The furnace features a door safety switch which cuts power to the elements when the door is opened.
| Model No. | Max °C | Internal Dimensions mm H x W x D | Volume Litres | External Dimensions mm H x W x D | 415 Volts AC Power |
|---|---|---|---|---|---|
| CWF12/23 | 1200 | 235 x 245 x 400 | 23L | 700 x 500 x 680 | 7 kW |
Lenton 9L/1200 Furnace. 1200°C 9 Litre
Price EX Works: £1,350 + VAT
3kW Single Phase to 1200°C.- 9 Litre chamber
- 3 Pin plug
- 240v single phase bench top furnace
- Eurotherm Digital Temperature Controller
- Quality heating elements
- Refurbished and tested
- Ashing Furnace option available if required
- Safety door switch
Product Description:
This product listing is for a Lenton 9L/1200 3kW single phase benchtop furnace. The chamber furnace features a vertically lifting full width door which affords obstruction free access to the work chamber and keeps the hot face away from the operator at all times. The internal capacity of the furnace is 9 Litres with a 1200°C temperature rating and quality element slabs for optimum uniformity. The furnace features a Eurotherm digital temperature controller for accurate set point adjustment and twin door safety switches. As this is a refurbished furnace, there are minor scratches and imperfections as shown in the images. Ashing furnace optional upgrade available on request for an additional cost.
Heating: The furnace chamber features two banks of element slabs for optimum uniformity. The chamber also includes a tiled hearth and roof.
Controls: The furnace is equipped with a Eurotherm Digital Controller to allow accurate set-point adjustment. Controls also include a mains switch, thermocouple break protection and heating indicator lamps. The furnace features twin door safety switches which cut power to the elements when the door is opened.
| Model No. | Max °C | Internal Dimensions mm H x W x D | Volume Litres | External Dimensions mm H x W x D | 230 Volts AC Power |
|---|---|---|---|---|---|
| 9L/1200 | 1200 | 125 x 180 x 405 | 9L | 695 x 555 x 630 | 3 kW |
Nabertherm LT3/11/B180 Burn Off Furnace. 1100°C 2.5 Litre
Price EX Works: SOLD
1.2kW Single Phase to 1100°C.- 2.5 Litre chamber
- Simple and economical to use
- 230v single phase dental burnoff furnace
- Nabertherm B180 Digital Programmer / Temperature Controller
- 2 x High quality slab heating elements
- Stainless steel case and chimney
- Nabertherm quality made in Germany
- Door plug with adjustable inlet to control airflow into the chamber.
- Safety door switch
Product Description:
This product listing is for a Nabertherm 1.2kW single phase laboratory furnace. The dental burn-off furnace features a vertically lifting full width door which affords obstruction free access to the work chamber and keeps the hot face away from the operator at all times. The internal capacity of the furnace is 2.5 Litres with a 1100℃ temperature rating and a slab element chamber. The furnace features a Nabertherm Type B180 digital programmer / temperature controller for accurate set point adjustment and a door safety switch. As this is a refurbished furnace, there are minor scratches and imperfections as shown in the images. Refurbished units are not only good for the environment but also represent a significant saving on Capital Investment. Please contact us should you require further details.
Heating: Heating output is controlled by a B180 Digital Controller and solid state relay. Twin slab elements located on the sides of the chamber ensure uniform temperature in the work zone.
Controls: Nabertherm B180 Digital Programmer / Temperature Controller with process display, provides accurate fully automatic control. Controls include thermocouple break protection and overtemp. Door safety switch - when the door is opened power is cut to the heating elements.
| Model No. | Max °C | Internal Dimensions mm H x W x D | Volume Litres | External Dimensions mm H x W x D | 230 Volts AC Power |
|---|---|---|---|---|---|
| LT3/11/B180 | 1100 | 100 x 160 x 155 | 2.5L | 420 x 380 x 430 | 1.2 kW |
Genlab 100°C Laboratory Incubator 102 Litre
Price EX Works: £980.00 + VAT
0.5 kW Single Phase to 100°C.- Stainless Steel Chamber
- Safe, Simple and Economical to use
- Direct Reading Thermostat
- Efficient Low Thermal Mass Insulation
- Natural Convection
- Incoloy Sheathed Elements
- Top Mounted Vent / Probe Access Port
- Overheat Thermostat
Product Description:
This product listing is for a Genlab 0.5kW single phase laboratory incubator. The incubator features a side opening door which affords easy access to the work chamber. The low energy rating of the elements and the high efficiency insulation combine to reduce energy consumption. The internal capacity of the incubator is 102 Litres with a 100℃ temperature rating and a stainless steel interior. As this is a refurbished incubator, there are minor scratches and imperfections. Please contact us should you require further details.
Heating: Two quality Incoloy sheathed elements carefully positioned in a service duct under the floor of the incubator.
Controls: The control system comprises of a direct reading thermostat and overheat thermostat. The incubator also includes a mains switch with indicator and heat and overheat indicators. This incubator has been tested in our test bay to maximum temperature.
| Model No. | Max °C | Internal Dimensions mm H x W x D | Volume Litres | External Dimensions mm H x W x D | 230 Volts AC Power |
|---|---|---|---|---|---|
| INC/100/SS | 100 | 420 x 530 x 460 | 102L | 580 x 850 x 580 | 0.5 kW |
MLF DO/225 190°C Drying Oven 200 Litre
Price EX Works: SOLD
2 kW Single Phase to 190°C.- Digital Temperature Controller
- Air Circulation
- CLAD Chamber - mild steel coated with aluminium
- Rear Exhaust Port
- Quality Inconel Sheathed Element
- 3 Removable Shelves
- Efficient Low Thermal Mass Insulation
Product Description:
This product listing is for a MLF DO/225 2kW single phase drying oven. The oven features double opening doors which affords easy access to the work chamber. The internal capacity of the oven is 200 Litres with a 190°C temperature rating and a CLAD chamber interior. The oven features a digital temperature controller. The heating element is positioned in a service duct at the base of the oven. A base mounted air circulation fan ensures temperature uniformity within the work chamber. As this is a refurbished oven, there are minor scratches and imperfections as shown in the images. Please contact us should you require further details.
Heating: Heating is supplied by a high quality circular inconel sheathed element carefully positioned around the outer radius of the fan blades, in a concealed duct at the base of the oven work chamber.
Controls: Digital Temperature Controller with adjustable set-point and process display. The oven controls also include over-temp selector and a mains switch. This oven has been tested in our test bay to maximum temperature.
| Model No. | Max °C | Internal Dimensions mm H x W x D | Volume Litres | External Dimensions mm H x W x D | 230 Volts AC Power |
|---|---|---|---|---|---|
| DO/225 | 190 | 540 x 890 x 420 | 200L | 910 x 1060 x 545 | 2 kW |
Gallenkamp OVE-200-010X 300°C Laboratory Oven 72 Litre
Price EX Works: SOLD
1.7 kW Single Phase to 300°C.- Stainless steel chamber
- Safe, simple and economical to use
- Air circulation oven
- Efficient low thermal mass insulation
- Vertex F4 temperature controller
- Thermostatic over temp protection
- Instrument access port
- High quality heating element
Product Description:
This product listing is for a Gallenkamp OVE-200-010X 1.7kW single phase laboratory oven. The oven features a side opening door which affords easy access to the work chamber. The internal capacity of the oven is 72 Litres with a 300°C temperature rating and a stainless steel interior. 2 removable shelves with 6 shelf postions. As this is a refurbished oven, there are scratches and imperfections as shown in the images. Please contact us should you require further details or images.
Heating: Quality heating element carefully positioned in a service duct at the side of the oven work chamber. Air circulation fan. The low energy rating of the element and the high efficiency insulation combine to reduce energy consumption.
Controls: Vertex F4 Temperature Controller and thermostatic over temperature protection. Over-temp indicator lamp
| Model No. | Max °C | Internal Dimensions mm H x W x D | Volume Litres | External Dimensions mm H x W x D | 240 Volts AC Power |
|---|---|---|---|---|---|
| OVE-200-010X | 300 | 475 x 400 x 380 | 72L | 655 x 785 x 510 | 1.7 kW |
The information and data herein are offered solely for your consideration and guidance. This data is not to be construed as a warranty or specification. Nothing contained herein is to be interpreted as authorization to practice a patented invention without a licence.