The electric oven and furnace specialists


Medium temperature furnaces


 

Print this page

 

 

Site Map

   
Home
 
 
  Incubators, Dryers and ovens
  Incubators
  Bench top dryers
  Rapid Dryers
  Dryers
 
  Annealing ovens, de-waxers and burn-out units
  Bench top
Annealing ovens
  Workshop floor standing
Annealing ovens
 
  Furnaces from 800°C to 1200°C
  Furnaces up to 1200°C
  Tube furnaces
  Top loading
Crucible furnaces
 
  Furnaces from 1200°C to 1600°C
  Furnaces from 1200 to 1600°C
  Tube furnaces
  Bottom loading
furnaces
 
  Furnaces for above 1600°C
  Furnaces for 1600°C and above
  Tube furnaces
 
  Other options
  Custom built
 

Used equipment
  Controller options
  Health and Safety guidance
 
 

Contact us

Medium temperature furnace range

M - range to 1200°C

M series furnace

  •   9 Standard sizes

  •   Safe, simple and economical to use
  •   Automatic control with indication
  •   High efficiency, low thermal mass insulation
  •   Over temperature protection
 

 

GENERAL DESCRIPTION:

M Furnaces have an inner "heat box" surrounded by an air gap set in a steel outer casing.

A vacuum formed, hardened, ceramic fibre shape forms the furnace door surround. A wear-resistant tile forms the sill. The furnace work chamber consists of a muffle of hard wearing sillimanite onto which high quality spiralled wire elements are carefully positioned to produce a uniform hot zone. The M9 furnace chamber (also M7 & M8 on request) is constructed from slab sections with elements embedded in them.

The chamber is surrounded with lightweight insulation for maximum efficiency in typical laboratory usage.

A sheathed thermocouple within the chamber gives accurate temperature sensing. The full width "up and over" door allows obstruction-free access. The door is counter balanced and below is a full width, stainless steel work shelf.

The controls are beneath the chamber and consist of a green illuminating push button on/off switch, an orange "load on" neon, and a red thermal fuse warning neon. PID solid state, fully automatic temperature controllers are fitted, incorporating thermocouple break protection as standard.

A choice of PID digital controllers with digital setting and readout are offered. A door safety switch is fitted to all models.  Various optional extras are available.

Model No Chamber/
Case Size
H x W x D
Weight
kg
Rating kW Heat up times (mins) to Power (W) to maintain 
800°C 1000°C 1200°C 800°C 1000°C 1200°C
M-1 75x75x150
535x380x420
32 1.15 26 37 52 230 255 390
M-2 100x125x150
535x380x420
34 1.55 30 40 55 260 350 490
M-3 120x175x175
560x435x510
45 2.00 45 65 87 340 520 705
M-4 90x150x235
560x435x510
45 2.00 43 60 80 380 500 690
M-5 120x175x355
560x435x640
58 3.00 58 85 110 400 560 930
M-6 140x190x560
560x435x840
85 6.00 70 95 125 670 860 1150
M-7 200x225x455
635x535x740
95 7.00 70 95 125 670 865 1250
M-8 200x305x455
635x535x740
109 7.00 85 115 150 790 920 1510
M-9 305x305x455
740x585x740
155 7.00 90 110 135 755 1100 1750

The above data is offered only as general performance characteristics and may alter due to mains voltage fluctuations and modifications etc. Dimensions are in mms.

The information and data herein are offered solely for your consideration and guidance and are not to be construed as a warranty or specification. Nothing contained herein is to be interpreted as authorisation to practice a patented invention without a licence.

ML Furnaces Limited

The electric oven and furnace specialists

71A Boughton Industrial Estate, Boughton, Nr. Ollerton, Notts. NG22 9LD.

Tel: 01623 835611   Fax: 01623 860745, E-mail: sales@mlfurnaces.com

Print this page

Last modified 20 August 2009