Laboratory ovens for general applications
ML Furnaces Limited 71, A Road, Boughton Industrial Estate Boughton, Nr. Ollerton, Notts. NG22 9LD.	Electric oven and furnace specialists	Tel: 01623 835611 Fax: 01623 860745 E-mail: sales@mlfurnaces.com

Site Map     Home       Incubators, Dryers and ovens   Incubators   Bench top dryers   Rapid Dryers   Dryers     Annealing ovens, de-waxers and burn-out units   Bench top Annealing ovens   Workshop floor standing Annealing ovens     Furnaces from 800°C to 1200°C   Furnaces up to 1200°C   Tube furnaces   Top loading Crucible furnaces     Furnaces from 1200°C to 1600°C   Furnaces from 1200 to 1600°C   Tube furnaces   Bottom loading furnaces     Furnaces for above 1600°C   Furnaces for 1600°C and above   Tube furnaces     Other options   Custom built   Used equipment   Controller options   Health and Safety guidance     Contact us

ML Furnaces Limited There are many applications in laboratories where ovens are required for drying or heating with different heating rate or accuracy requirements. M L Furnaces Ltd has developed a range of ovens from small bench top units which may be used for research laboratory development to large capacity units suitable for larger or production operations. This page draws together the title pages for the units which are most likely to be of general use in laboratories as well as including a few which may be of a specialist nature. Low temperature applications For low temperature applications such as drying moist materials or testing electronic components for stability in hot atmospheres the small drying ovens including the incubators may be of use. Larger ovens can be found in the bench top range which can accommodate items up to about 500mm cube and also offer air circulation as a means of removing moisture and improving uniformity of temperature distribution. Where large amounts of moisture are to be removed quickly the Rapid drying ovens are available. These have larger outlet vents and greater power input to allow for the extra heat and air flow required. For large items up to about 1000mm cube or where shelves of smaller items are required there is a range of larger drying ovens as standard units or they can be made to measure as single or multiple chamber units. These units generally have maximum operating temperatures below 250°C and frequently have air circulation to allow the temperature distribution in the working chamber to be less than ± 5°C of the set temperature. Medium temperature applications For laboratories needing temperatures higher than about 250°C, M L Furnaces Ltd have a range of air circulating ovens designed for these temperatures. They include small bench furnaces and larger floor standing production units. This range of ovens can also be used for metals and materials since they will usually be constructed to have a maximum operating temperature of 650°C to 700°C. High temperature applications Where metals and other materials are used there may be a call for higher temperatures of operation. Heat treatment above about 750°C can generally be satisfactorily achieved without the need for air circulation since radiation begins to play a significant part in temperature distribution. It is also difficult to construct satisfactory bearings and fan blades to operate above this temperature. The M L Furnaces Ltd range for heat treatment furnaces begins with the annealing oven (including tempering and other practices) mentioned above and extends to the M range of furnaces for temperatures up to 1200°C with chamber sizes taking ware from 50 x 50 x 100mm to about 250 x 250 x 300mm. Other sizes of furnace can be built to order. Within this temperature band is a top loading furnace which can be used with or without a crucible. In the crucible configuration an A6 size crucible can be used for melting copper alloys. It could also be used with care as an aluminum melter. Other furnaces Chamber furnaces with front loading or bottom loading are available to work at temperatures up to 1800°C. Ranges of tube furnaces with different operating temperatures and tube diameters are also available. Bottom Loading furnace Top Loading furnace Tube furnace

Incubators Laboratory drying ovens Ventilated ovens for GRP & Electronics Commercial drying, de-waxing & core baking ovens Tool room tempering & annealing ovens Ovens & furnaces for Aerospace Ovens & Furnaces for Metals Kilns & Furnaces for Ceramics & Glass Sintering Furnaces for Metals & Ceramics

ML Furnaces Limited

71A Boughton Industrial Estate

Boughton, Nr. Ollerton, Notts. NG22 9LD.

Tel: 01623 835611   Fax: 01623 860745

E-mail: sales@mlfurnaces.com

Last modified 23 September 2010